Welcome! You have received the battery.

Here are the recommended steps before connecting it:

• Check whether any damage occurred during delivery — preferably directly at the courier’s office. (If the delivery looks “suspicious”, please immediately fill out a Damage Report at the carrier’s branch.)
• The “first start-up” before operation must be performed by a specialist — a certified electrician, etc. Turn on the battery itself for a basic “test”.

(without additional loads or connections — check the output using a tester).

• Great! You do not see an error (“Alarm”)? This means the device is functioning properly and can now be connected. Please note that the wiring diagram for one or more batteries is available on the website.
• The standard battery connection scheme — on the battery: CAN, on the inverter: RS485 or BMS. (depends on the port of the device; connection via RJ45 cable.)

• After a “correct” connection, your device will automatically detect the battery. Then you need to configure the battery’s charge/discharge settings in the device. (we recommend starting with 50 A and increasing up to the maximum supported by the device.)

If you have any doubts during connection — our consultants will provide additional assistance.