0
TelegramViberWhatsapp
Ukraine: +38 095 6563757
Poland: +48 22 390 63 48
E-Mail: info@prom-nasos.pro

Gear pump for viscous products EMSE EDP 1002, 1 inch, 1 m3/h, 10 bar, 1.1 kW, 1000 rpm, carbon steel

Code: 1051005
(0 review)
Gear meshing typeexternal
Gear material8620 STEEL
ProducerEMSE
Power capacity, kW1,1
Input pipe diameter1"
Output pipe diameter1"
Rate of turn, rpm1 000
Explosion protectionNo
Max. head, m100
Max.temperature, C180
Nom.flow rate, m3/h1
Nom.pressure, Mpa1,6
Pressure, bar10
SealMechanical Seal
Shaft materialAISI 420
Housing materialcast iron GG 25
Operating temperature-20°C +180°C
Serial number of the pumpEDP
Country of OriginTurkey
PumpTypegear type
Drive Typeelectric
Installation Typehorizontal
Type of configurationwith engine
Show all features (23)
Ukraine: Pre-order only
Poland: Pre-order only
Germany: Pre-order only
Italy: Pre-order only
Price on request
Добавить в сравнение
We deliver anywhere in the world
EMSE gear pumps of the EDP series, depending on the material of the gear part (cast iron, stainless steel), can pump viscous liquids such as fuel oil, polyester components, caustic resin, oil, glue, mineral oil, gel, grease, chocolate, soap raw materials, glucose, quaternary esters, glycerin, rubber, wax, honey, molasses, oil and many other liquids. The principle of operation: as a result of the rotation of the gears in constant engagement, a low and high pressure zone is formed. As a result, the fluid is drawn into the suction nozzle and, moving in the gap between the gear teeth and the housing, enters the discharge zone to the discharge nozzle. Gear pumps are reversible and can operate in both directions. These pumps can be connected to a drive in a variety of ways. These include: direct connection to an electric motor via a coupling, connection via a gearbox, connection via a V-belt drive, connection to a variable speed drive. (This connection method allows the speed of rotation to be varied and thus the flow to be controlled.) EDP pumps from model 1015 onwards are available with a casing with a heating jacket as standard. This feature allows for a wider range of process applications for pumping products that are prone to crystallisation at lower temperatures.
Category: Gear pump
Gear meshing typeexternal
Gear material8620 STEEL
ProducerEMSE
Power capacity, kW1,1
Input pipe diameter1"
Output pipe diameter1"
Rate of turn, rpm1 000
Explosion protectionNo
Max. head, m100
Max.temperature, C180
Nom.flow rate, m3/h1
Nom.pressure, Mpa1,6
Pressure, bar10
SealMechanical Seal
Shaft materialAISI 420
Housing materialcast iron GG 25
Operating temperature-20°C +180°C
Serial number of the pumpEDP
Country of OriginTurkey
PumpTypegear type
Drive Typeelectric
Installation Typehorizontal
Type of configurationwith engine
Loading...
Also buy with this product
Pump Сontroller Y1-4000D, ABS plastic, 3-phase 380V-415V, 0,75-4kW
1042834
Producer
BTS Engineering
Power capacity, kW
0,75-4
In stock
0
$113
PN6 DN100 Wafer butterfly valve, body and disc AISI 304, PTFE, Single-acting (with spring) Pneumatic actuator Ex+positioner 4-20MA
1042673
Material of the disk
AISI 304 stainless steel
Control signal, mA
4-20
Preorder
0
$1 420
Pump Сontroller 20Y-3000, ABS plastic, 1-phase 220V-240V, 0,37-3kW
1042833
Producer
BTS Engineering
Power capacity, kW
0,37-3
In stock
0
$75
DN40 Thermodynamic flanged condensate trap PN16/1.0619
1040126
Producer
BTS Engineering
Nom.pressure, Mpa
1,6
In stock
0
$385
DN25 Pneumatically actuated control valve 10P11Y-DNx2516Z-L112C-C (CF8 body, SS304 seat) with YT-1000 positioner, 4-20mA input, Ex
1040256
Control signal, mA
4-20
Mode of action
normally closed
Preorder
0
$1 959
Products from the same category
Gear pump for pumping grub oil EMSE EDP 1006 AISI 304, 1 1/2" 6 m3/year, 5.5 kW, 1500 rpm
1049919
Producer
EMSE
Power capacity, kW
5,5
Pre-order only
0
$3 431
Шестеренчатий насос EMSE EDP 1015, DN50, 15 м3/год, 4 бар, 5,5 кВт, 380В, 1000 об/хв
1052051
Gear meshing type
external
Gear material
8620 STEEL
Pre-order only
0
$3 552
Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body
1051976
Gear meshing type
external
Gear material
8620 STEEL
Pre-order only
0
$12 686
Gear pump for pumping engine oil EMSE EDP 1010, 1 1/2 inches, 10 m3/h, 3 bar, 3.0 kW, 1000 rpm, carbon steel
1051659
Gear meshing type
external
Producer
EMSE
Pre-order only
0
$2 165
Gear pump for unrefined sunflower oil EMSE EDP 1030, DN80, 30 m3/h, 3 bar, 7.5 kW, 380V, 1000 rpm
1051519
Gear meshing type
external
Gear material
8620 STEEL
Pre-order only
0
$4 059
Contact us