0
TelegramViberWhatsapp
Ukraine: +38 095 6563757
Poland: +48 22 390 63 48
E-Mail: info@prom-nasos.pro

VS4-Z150-200, 3M semi-submersible chemical pump with 110kW Siemens motor

Code: 1039817
(0 review)
ProducerBTS Engineering
Pump capacity, m3/h300
Feed height, m40
Power capacity, kW110
Material20 Alloy Steel
Input pipe diameter150
Output pipe diameter150
Rate of turn, rpm2950
ProtectionIP55
Power supply3х380 V, 50 Hz
Max.temperature, C90
Nom.flow rate, m3/h300
Nom.head, m40
SealMechnical seal :P54
Submersible part length, mm3000
Suction capacity (NPSH), m6
Serial number of the pumpVS4
PumpTypesemi-submersible
Drive Typeelectric
Installation Typevertical
Show all features (20)
Ukraine: Pre-order only
Poland: Pre-order only
Germany: Pre-order only
Italy: Pre-order only
Price on request
Добавить в сравнение
We deliver anywhere in the world
The VS vertical submersible pump is very safe, reliable and stable in operation, and has a long service life. Maintenance is simple and has fewer categories of spare parts with wide interchangeability. The housing is radially divided and has a double housing design for a flange with a nominal size of 80 mm and above to reduce the radial force and vibration of the pump caused by hydraulic action. The wear and corrosion resistance of the impeller and diffuser is fully taken into account, so that the service life of the impeller and other easily worn parts is extended. The impeller and diffuser have a multi-stage design that can meet different pressure requirements. The axial force is balanced through the balancing hole for the impeller. The front and rare impeller cover are equipped with replaceable special ladder-type O-rings to protect the impeller and pump housing. This effectively prevents foreign objects from entering the inlet gaps of the O-ring after the pump is stopped. Thus, the service life of the O-ring and impeller is significantly extended. The pump shaft is designed for a reliable "extension" connection with multiple support points, which guarantees stable operation in critical conditions. The pump shaft can be protected by a tube to avoid wear or corrosion. And a protective tube is not needed when clean water is being treated. A filter with a suitable cell size is installed on the pump inlet pipe, which effectively prevents the ingress of large solid particles and damage to the pump, while at the same time ensuring a clean Inlet area and maximizing suction losses, as well as increasing pump efficiency. The impeller and pump housing are submerged under water, so there are no problems with dehumidification and ventilation when starting the pump. The separate pressure pipe of the pump has no leakage of liquid under pressure in the direction of the shaft. And if used in an open system, no shaft seal is required; if used in a closed system, as well as a highly volatile or toxic liquid, a mechanical seal or oil seal will be available. Rotating parts can be adjusted along the axis and are supported by rolling and sliding bearings. Rolling bearings are lubricated with grease and mounted on the sole. Plain bearings are self-lubricating or externally lubricated. The self-lubricating structure (wash and lubricate each bearing with pumped liquid from the pump pump, and then remove the heat generated by the friction Steam) is suitable for transferring clean liquid without solid matter. External lubrication structure (flush and lubricate each bearing with an external source of clean pressurized liquid, and then remove the heat generated by the friction steam, while stopping solid or foreign matter from entering the bearing to ensure normal operation), suitable for processing cellulose liquids with solids or foreign matter. The pump rotates clockwise when viewed from the drive side.
ProducerBTS Engineering
Pump capacity, m3/h300
Feed height, m40
Power capacity, kW110
Material20 Alloy Steel
Input pipe diameter150
Output pipe diameter150
Rate of turn, rpm2950
ProtectionIP55
Power supply3х380 V, 50 Hz
Max.temperature, C90
Nom.flow rate, m3/h300
Nom.head, m40
SealMechnical seal :P54
Submersible part length, mm3000
Suction capacity (NPSH), m6
Serial number of the pumpVS4
PumpTypesemi-submersible
Drive Typeelectric
Installation Typevertical
Loading...
Also buy with this product
Pump Сontroller Y1-4000D, ABS plastic, 3-phase 380V-415V, 0,75-4kW
1042834
Producer
BTS Engineering
Power capacity, kW
0,75-4
In stock
0
$135,86
PN6 DN100 Wafer butterfly valve, body and disc AISI 304, PTFE, Single-acting (with spring) Pneumatic actuator Ex+positioner 4-20MA
1042673
Material of the disk
AISI 304 stainless steel
Control signal, mA
4-20
Preorder
0
$1 719,35
Pump Сontroller 20Y-3000, ABS plastic, 1-phase 220V-240V, 0,37-3kW
1042833
Producer
BTS Engineering
Power capacity, kW
0,37-3
In stock
0
$90,59
DN40 Thermodynamic flanged condensate trap PN16/1.0619
1040126
Producer
BTS Engineering
Nom.pressure, Mpa
1,6
In stock
0
$465,14
DN25 Pneumatically actuated control valve 10P11Y-DNx2516Z-L112C-C (CF8 body, SS304 seat) with YT-1000 positioner, 4-20mA input, Ex
1040256
Control signal, mA
4-20
Mode of action
normally closed
Preorder
0
$2 371,63
Products from the same category
Vertical centrifugal pump IM 110, PP, 500 mm, VITON
IM110P-V0500N
Producer
DEBEM
Pump capacity, m3/h
20
Pre-order only
0
$4 278,33
Vertical centrifugal pump IM 110, PVDF, 500 mm, VITON
IM110FC-V0500N
Producer
DEBEM
Pump capacity, m3/h
20
Pre-order only
0
$7 306,98
Vertical centrifugal pump IM 110, PVDF, 1250 mm, VITON
IM110FC-V1250N
Producer
DEBEM
Pump capacity, m3/h
20
Pre-order only
0
$8 145,02
Vertical centrifugal pump IM 110, PVDF, 500 mm, 1,1 kW, EPDM
IM110F-D-0500-N
Producer
DEBEM
Pump capacity, m3/h
20
Pre-order only
0
$7 990,63
Vertical centrifugal pump IM 110, PVDF, 800 mm, 1,1 kW, VITON
IM110F-V-0800-N
Producer
DEBEM
Pump capacity, m3/h
20
Pre-order only
0
$8 087,68
Contact us